How to hang your AttoPlate?

Thank you for choosing attoplate.com to elevate your space with artistry. It is very easy to hang your AttoPlate. To ensure a seamless and secure display, please follow these step-by-step instructions for hanging your AttoPlate on the wall. We've designed a magnetic hanging system for your convenience, making it easy to showcase your favorite art pieces.

Step 1: Wall Preparation Before hanging your AttoPlate, ensure that the wall surface is dry, clean, and free from any powdered dirt or loose paint. Proper wall preparation is essential for a secure attachment. For optimal results, our magnetic hanging system thrives on smooth and stable wall surfaces.

Avoid walls with heavy textures, uneven surfaces or visible cracks as they may result in weak adhesion and walls with delicate or easily damaged finishes, such as wallpaper or thin plaster or freshly applied paint as removal could potentially harm the wall surface.

Step 2: Cleaning Thoroughly clean the chosen area on the wall where you intend to display your AttoPlate. Use a clean, dry cloth to remove any dust or debris that may affect the adhesion of the wall sticker.

Step 3: Wall Sticker Attachment Locate the wall sticker provided with your AttoPlate. Carefully peel off the backing and apply one of the sticker to the cleaned area on the wall. Press down firmly to ensure proper adhesion. Make sure there are no air bubbles underneath the applied wall sticker.

Step 4: Magnet Attachment Now, it's time to attach the magnets to the wall sticker. Included with your AttoPlate is a strong magnet. Remove the backing from the magnet to reveal the adhesive. Apply the magnet to the center of wall sticker. Press the magnet film firmly for at least 60 seconds onto the wall sticker to ensure a strong bond. These magnets are designed to securely hold your AttoPlate.

Step 5: AttoPlate Installation Turn your attention to your AttoPlate panel. Flip it over to reveal the metal plate on the back. This metal plate will securely attach to the magnet on the wall sticker.

Step 6: Hanging Your AttoPlate Gently place your AttoPlate near the wall sticker with the steel plate facing the magnets. The magnets will attract the steel plate, allowing your AttoPlate to attach securely to the wall. Make sure the magnets are aligned to the middle for the metal plate such that no part of the magnet is outside of the metal plate.

Step 7: Adjust and Enjoy Take a step back to ensure your AttoPlate is level and positioned exactly as you desire. Adjust if necessary. Once you're satisfied with the placement, step back and enjoy the gallery-worthy display of your AttoPlate.

For Removal: For wall magnet, begin by warming the adhesive area with a hair dryer or heat gun, then gradually peel while constantly applying heat. Similarly, for wall sticker, employ low heat to ease their removal, ensuring a gentler release.